Using the Operator Panel Menus and Keypad 291
Wireless Setup Wizard
NOTE:
• Wireless Setup Wizard is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network interface. The printer automatically searches and list available access points.
Select one of the access points, and enter a pass phrase or WEP key to complete the wireless setup. You can also
specify and configure the wireless network manually.
Values:
Select
Access
Select the access point from the list.
WEP Key When you select an access point using WEP as the
encryption type, enter the WEP key.
WPA When you select an access point using WPA, WPA2, or
Mixed as the encryption type, enter the password.
WPA2
To Next Page
Loading...
Need help?
General
