Maintenance 455
Checking Page Counts
The total number of printed pages can be checked on the operator panel. Four meters are available: Meter1,
Meter2, Meter3, and Meter4.
The Billing Meters counts the number of pages printed properly. Single side color print (including Pages Per
Sheet (N-Up)) is counted as one job, and 2-sided print (including Pages Per Sheet (N-Up)) is counted as two. During
2-sided printing, if an error occurs after one side is printed properly, it is counted as one.
When printing color data, which has been converted by using ICC profile on an application, with the Color (Auto)
setting, the data is printed by color even if it seems to be black and white data on the monitor. In that case, Meter1
and Meter4 are increased.
When doing 2-sided printing, a blank page may be inserted automatically depending on the settings of the
application. In this case, the blank page is counted as one page.
For information about the individual meter, see "Billing Meters" on page 282.
Use the following procedure to check a meter:
1 Press the (System) button.
2 Select Billing Meters.
3 Check the number of pages.
To Next Page
Loading...
Need help?
General
