Fuji Xerox DocuPrint CM405 df User Manual

Using the Operator Panel Menus and Keypad 343
Resetting to Factory Defaults
After executing this function and rebooting the printer, the address book or all the menu parameters, except the
parameters for the network, are reset to their default values.
1 Press the (System) button.
2 Select the Tools tab.
3 Select Admin Settings.
4 Select Maintenance.
5 Select Initialize NVM.
6 Select the desired setting.
7 Select Initialize.
The printer restarts automatically to apply the settings.

Fuji Xerox DocuPrint CM405 df Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM405 df
Category	All in One Printer
Language	English