Scanning 243
Changing the Scan Settings for an Individual Job
Use the scan options to configure a variety of scanner features when scanning to a Network, Application, or USB
storage device.
• Scan To Network/Scan To PC/Scan To USB Memory Tab
You can set the basic options of the scan such as Output Color, Resolution, 2 Sided Scanning and
File Format.
• Quality Tab
You can set the options concerning image quality such as Lighten / Darken, Sharpness, Contrast and
Auto Background Suppression.
• Options Tab
You can set other options for the scan such as Original Size and Edge Erase.
To temporarily change a scan setting when emailing the scanned image:
1 Press the (Services) button.
2 Select E-mail.
3 Select scan options on the Quality and Options tabs.
4 Change the selected setting, and then select OK.
5 Press the (Start) button to begin the scan.
To temporarily change a scan setting when scanning to a computer:
1 Press the (Services) button.
2 Select Scan to.
3 Select the scan destination.
4 Select scan options on the Scan To PC, Quality and Options tabs.
5 Change the selected setting, and then select OK.
6 Press the (Start) button to begin the scan.
To Next Page
Loading...
Need help?
General
