Using the Operator Panel Menus and Keypad 307
OffHook Wake Up
Purpose:
To specify whether to wake up from the Low Power or Sleep mode when you pick up the handset of the external
telephone.
Values:
Auto Job History
Purpose:
To automatically print a job history report after every 20 jobs.
Values:
The job history report can also be printed using the Report / List menu.
RAM Disk
NOTE:
• RAM Disk feature is not available when the hard disk unit is installed.
Purpose:
To allocate memory to the RAM disk file system for the Secure Print and the Sample Print features. The change
becomes effective after the printer is turned off and then on again.
Values:
*1
When the 512MB Memory is installed.
NOTE:
• Restart your printer when you change the settings for the RAM Disk menu.
Fax Server Address Book
Purpose:
To specify whether to search the phone numbers from the Address Book for the LDAP server.
Values:
NOTE:
• You can search the phone numbers only from the local Address Book when Fax Server Address Book is set to Off.
Off
*
Does not wake up from the Low Power or Sleep mode when you pick up the
handset of the external telephone.
On Wakes up from the Low Power or Sleep mode when you pick up the handset of
the external telephone.
Off
*
Does not automatically print a job history report.
On Automatically prints a job history report.
Off Does not allocate memory to the RAM disk file system. Secure Print and Sample
Print jobs will abort and be recorded to the job log.
On
*
50MB
*
(300MB
*1
)
Sets the allocation of memory to the RAM disk file system in increments of 50 MB.
50-100MB
(50-600MB
*1
)
Off
*
Does not search the phone numbers from the Address Book for the LDAP server.
On Searches the phone numbers from the Address Book for the LDAP server.