298 Using the Operator Panel Menus and Keypad
Line Monitor
Purpose:
To set the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a
connection is made.
Values:
DRPD Pattern
Purpose:
To provide a separate number for faxing with a distinctive ring pattern.
Values:
Off Turns off the volume of the line monitor.
Min Sets the volume of the line monitor to minimum.
Middle
*
Sets the volume of the line monitor to middle.
Max Sets the volume of the line monitor to maximum.
Pattern1–7 DRPD is a service provided by some telephone companies. DRPD patterns are
specified by your telephone company. The patterns provided with your printer are
shown below:
Ask your telephone company which pattern you need to select to use this service.
For example, Pattern7 is the New Zealand FaxAbility distinctive ringing pattern: rings
for 400 ms, stops for 800 ms, rings for 400 ms and stops for 1400 ms. This pattern is
repeated over and over again. This printer only responds to Distinctive Alert
cadence(s) DA4 in New Zealand.
Pattern1
Pattern2
Pattern3
Pattern4*
Pattern5
Pattern6
Pattern7
To Next Page
Loading...
Need help?
General
