200 Copying
Pages Per Side
To print two original images to fit onto one sheet of paper.
1 Select the Output tab, and then select Pages Per Side.
2 Select the desired setting, and then select OK.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
When you are using the document glass and it is set to Auto or Manual, the display prompts you for another page
after pressing the (Start) button.
a If you want to place a new document, replace the document with a new document, and then select
Continue or press the (Start) button.
b If you finish copying, select Print Now.
Off* Does not perform Pages Per Side printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
Manual Prints the original pages onto the one sheet of paper in the size specified in Reduce
/ Enlarge.
Auto:
Automatically
reduces the
pages to fit in
one page.
Manual:
Reduces the pages in
the custom size
depending on the
setting of the Reduce /
Enlarge menu.
To Next Page
Loading...
