EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuPrint CM405 df

Fuji Xerox DocuPrint CM405 df User Manual

Fuji Xerox DocuPrint CM405 df
488 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #293 background imageLoading...
Page #293 background image
Using the Operator Panel Menus and Keypad 293
WPS Setup
NOTE:
• WPS Setup is available only when the printer is connected using the wireless network.
Purpose:
To configure the wireless network using WPS.
Values:
IP Mode
Purpose:
To configure the IP mode.
Values:
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
Push Button Control
*
Start Configuration Configures the wireless setting with WPS-PBC.
PIN Code Start Configuration Configures the wireless setting using the PIN code assigned
automatically by the printer.
Print PIN Code Prints the PIN code. Confirm it when entering PIN assigned to
the printer into your computer.
Dual Stack
*
Uses both IPv4 and IPv6 to set the IP address.
IPv4 Mode Uses IPv4 to set the IP address.
IPv6 Mode Uses IPv6 to set the IP address.
Get IP Address DHCP / AutoIP
*
Sets the IP address automatically. A random value in the range
of 169.254.1.0 to 169.254.254.255 that is not currently in
use on the network is set as the IP address. The subnet mask is
set as 255.255.0.0.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Use this option when you want to set the IP address manually on
the operator panel.
IP Address When an IP address is being set manually, the IP is allocated to
the printer using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.
Subnet Mask When an IP address is being set manually, the subnet mask is
specified using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to
255.255.255.255.255 cannot be specified as the subnet
mask.
Gateway
Address
When an IP address is being set manually, the gateway address
is specified using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0
to 254. 127 and any value in the range of 224 to 254 cannot be
specified for the first octet of a gateway address.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CM405 df and is the answer not in the manual?

Fuji Xerox DocuPrint CM405 df Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CM405 df
CategoryAll in One Printer
LanguageEnglish

Related product manuals