Using the Operator Panel Menus and Keypad 341
Setting the Energy Saver Option
You can set the Energy Saver for the printer. The printer switches to the Energy Saver mode after the specified time.
NOTE:
• If the Panel Lock Set is set to Enable, you need to enter the four digit passcode to enter the Admin Settings menu.
To set the Energy Saver:
1 Press the (System) button.
2 Select the Tools tab.
3 Select Admin Settings.
4 Select System Settings.
5 Select General.
Select Energy Saver.
6 Select Low Power Timer or Sleep Timer.
7 Select the or or enter the desired value using the number pad, and then select OK.
You can select from 1–60 minutes for Low Power Timer or 1–6 minutes for Sleep Timer.
8 To return to the previous screen, select .
To Next Page
Loading...
Need help?
General
