Scanning 213
4 Select Document Feeder or Flatbed in Paper source.
NOTE:
• Select Document Feeder when you want to scan the document loaded in the DADF. Select Flatbed when you want to
scan the document loaded on the document glass.
5 Select your scanning preferences and click Adjust the quality of the scanned picture to display the
Advanced Properties dialog box.
6 Select the desired properties including brightness and contrast, and then click OK.
7 Click Scan to start scanning.
8 Click Save from the Paint menu.
9 Enter a picture name, and select a file format and destination to save the picture.
To Scan an Image From Control Panel
NOTE:
• This feature is supported on Windows Server 2003 and Windows XP only.
1 Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 193
• "Making Copies From the Document Glass" on page 191
2 Click start → Control Panel → Printers and Other Hardware → Scanners and Cameras.
3 Double-click the scanner icon.
The Scanner and Camera Wizard launches.
4 Click Next to display the Choose Scanning Preferences page.
NOTE:
• The screen image may vary depending on the operating system.
To Next Page
Loading...
Need help?
General
