Scanning 231
The Add Network Scan Address page appears.
To fill in the fields, enter the information as follows:
1 Name Enter a friendly name that you want it to appear on the Computer/Server Address
Book.
2 Server Type Select Computer (SMB) if you store the document in a shared folder of your
computer.
Select Server (FTP) if you use an FTP server.
3 Server Address Enter a server name or IP address of your computer or the FTP server that you have
shared out.
The following are examples:
• For Computer (SMB):
Server name: myhost
IP address: 192.168.1.100
• For Server (FTP):
Server name: myhost.example.com
(myhost: host name, example.com: domain name)
IP address: 192.168.1.100
4 Server Port Number Enter the port number. If you are unsure, you can enter the default value of 139 for
SMB and 21 for FTP.
5 Login Name Enter the user account name that has access to the shared folder on your computer
or FTP server.
6 Login Password Enter the password corresponding to the above login name.
NOTE:
• Empty password is not valid in the Scan to Computer feature. Ensure that you
have a valid password for the user login account. (See "Setting a Login Name
and a Password (SMB Only)" on page 218 for details on how to add a password
in your user login account.)
7 Re-enter Password Re-enter your password.
To Next Page
Loading...
Need help?
General
