Using the Operator Panel Menus and Keypad 335
• Tray1
Purpose:
To specify the paper loaded in the standard 550 sheet tray.
Values:
*1 The default for Size varies depending on region-specific factory default.
NOTE:
• For more information on supported paper sizes, see also "Usable Print Media" on page 139.
Display Tray
Prompt
Enter a check to display a popup message that prompts to set Type and Size when paper is loaded in
the standard 550 sheet tray. The factory default is on (check).
Size A4 (210 x 297
mm)
*1
mm series A5 (148 x 210 mm)
B5 (182 x 257 mm)
Letter (8.5 x 11")
Folio (8.5 x 13")
Legal (8.5 x 14")
Executive (7.25 x
10.5")
New Custom Size Width(x) 210 mm
*
Specifies the width of the custom size
paper.
148-215 mm
Length(y) 297 mm
*
Specifies the length of the custom size
paper.
210-355 mm
inch series Letter (8.5 x 11")
*1
Folio (8.5 x 13")
Legal (8.5 x 14")
A4 (210 x 297 mm)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x
10.5")
New Custom Size Width(x) 8.3 inches
*
Specifies the width of the custom size
paper.
5.8-8.5 inches
Length(y) 11.7 inches
*
Specifies the length of the custom size
paper.
8.3-14.0 inches
Type Plain
*
Other Type
Lightweight
Cardstock
Heavyweight
Cardstock
Light Glossy
Cardstock
Heavy Glossy
Cardstock
Letterhead
Hole Punched
Colored
To Next Page
Loading...
