© 2011 Fujitsu Technology Solutions
SNTP SNTP Timer Client System
Spanning Tree 802.1D/W/S Spanning Tree Control
Storm Control Storm Control System
Stacking Stacking System
TACACS TACACS+ Security System
TFTP TFTP/FTP Upgrade System
Timer System timer Clock
VLAN 802.1Q GVRP/GARP/GMRP
User Configuration User Login & Admin Control
Web Web UI System
Table 1-1 Facility code list
• SEVERITY is a single-digit code from 0 to 7 that reflects the severity of the condition. The
lower the number, the more serious the situation. Table 1-2 lists the message severity
levels.
Severity Level Description
0 – emergency System is unusable.
1 – alert Immediate action required.
2 – critical Critical condition.
3 – error Error condition.
4 – warning Warning condition.
5 – notification Normal but significant condition.
6 – informationalInformational message only.
7 – debugging Message that appears during debugging only.
Table 1-2 Message Severity Levels
All syslog messages generated by a PRIMERGY BX900 switch other than the master switch
are displayed ending with (Switch-x) where Switch is the ip address of stack master and x is
the unit number of the stack member generating the message.
This example shows a partial switch system message on a switch other than a PRIMERGY
BX900 Connection Blade:
0 2000/04/01 09:41:21 Link Up: Unit: 1 Slot: 0 Port: 8
1 2000/04/01 06:34:02 Link Down: Unit: 1 Slot: 0 Port: 8
2 2000/04/01 01:57:25 Link Up: Unit: 1 Slot: 0 Port: 8
3 2000/04/01 01:57:24 Link Down: Unit: 1 Slot: 0 Port: 8
To Next Page
Loading...
