© 2011 Fujitsu Technology Solutions
2.4 User Configuration Messages
This section contains the User Configuration module messages.
Severity Level 2
Error Message Registrar ID
Explanation Bad return value on notify save call.
Recommended Action The system is not init successful.
Severity Level 6
Error Message Error on call to osapiFsWrite routine on config file user_mgr.cfg
Explanation Configuration file write fails.
Recommended Action The configuration is corrupted instead of the factory default.
Severity Level 6
Error Message User Login Failed for USERNAME
Explanation User authentication is failed.
Recommended Action Check the username and password is correct or not.
Severity Level 6
Error Message Access level for user USERNAME could not be determined.
Setting to READ_ONLY.
Explanation User authority issue.
Recommended Action Check the user authority.
Severity Level 6
Error Message Could not migrate config file user_mgr.cfg from version
NUMBER1 to NUMBER2. Using defaults.
Explanation Configuration data migration fails.
Recommended Action The configuration file is corrupted instead of the factory default.
To Next Page
Loading...
