Fujitsu PRIMERGY BX900 - SNTP Messages

© 2011 Fujitsu Technology Solutions
2.20 SNTP Messages
This section contains the SNTP module messages.
Severity Level 6
Error Message sntpApiInit: cannot initialize API with cfg data
Explanation Configuration data initialize fail.
Recommended Action The SNTP module is failed to init.
Severity Level 6
Error Message sntpApiInit: cannot initialize API with server stats data
Explanation Server status data initialize fail.
Recommended Action The SNTP module is failed to init.
Severity Level 6
Error Message Error on call to sysapiCfgFileWrite routine on config file sntp.cfg
Explanation Configuration file write fail.
Recommended Action The SNTP config file is corrupt instead of the factory default.
Severity Level 6
Error Message sntpCnfgrInitPhase2Process: Could not register with nvStore
Explanation Configuration file callback function register fail.
Recommended Action The SNTP config file is corrupt instead of the factory default.
Severity Level 6
Error Message FILE: LINE: sntpCnfgrInitPhase3Process: SNTP Cfg unable to
read config file
Explanation Configuration file read fail.
Recommended Action The SNTP config file is corrupt instead of the factory default.
Severity Level 6
Error Message sntpCfgTask: Bad status on receive message from cfg queue
STATUS
Explanation Receive worng message.
Recommended Action The SNTP config file is corrupt instead of the factory default.
Severity Level 6
Error Message FILE: LINE: sntpCfgTaskCreate: Error allocating CFG data
Explanation Memory allocate fail.
Recommended Action The SNTP module is failed to init.