Fujitsu PRIMERGY BX900 - Port-Monitor Messages

© 2011 Fujitsu Technology Solutions
2.24 Port-Monitor Messages
This section contains the Port-Monitor module messages.
Severity Level 6
Error Message nimIntfQuery failed for intIfNum <intIfNum>
Explanation Determine if the interface is attached
Recommended Action The interface need to check the attached available or not.
Severity Level 6
Error Message Error on call to sysapiCfgFileWrite routine on config file
mirrorCfgData.cfg
Explanation check for file saving
Recommended Action The config file is corrupt instead of fatory-default.
Severity Level 6
Error Message mirrorIntfChangeCallback: Received an interface event callback
while not in EXECUTE state
Explanation routine outside the state
Recommended Action The port-monitor module is failed to init.
Severity Level 6
Error Message Mirroring: Failed to notify components of probe status change
Explanation Notify all interested components of an Interface Change event
Recommended Action The port-monitor module is failed to init.