Fujitsu PRIMERGY BX900 - IGMP Snooping

© 2011 Fujitsu Technology Solutions
3.2.9 IGMP Snooping
This section contains the IGMP Snooping module messages.
Error Message Incorrect input! Use 'ip igmp snooping static <macaddr> vlan
<vlan-id> interface <unit/slot/port>
Explanation Incomplete command for this function.
Recommended Action Use 'ip igmp snooping static <macaddr> vlan <vlan-id> interface
<unit/slot/port>
Error Message IGMP Snooping ADMIN must be enable. Use 'ip igmp snooping'
command to enable.
Explanation User attempt to set static multicast group before enable ip igmp
snooping.
Recommended Action Use 'ip igmp snooping' command to enable IGMP Snooping first.
Error Message This function is not allowed on port-channel members.
Explanation User attempt to set static multicast group on a port-channel
member. But it is failed.
Recommended Action The static multicast group can not be configured on port-channel
members.
Error Message User Input Error: Invalid MAC Address
Explanation User input invalid format of MAC Address.
Recommended Action Correct the format of MAC Address.
Error Message Incorrect input! Use 'ip igmp snooping mrouter interface'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘ip igmp snooping mrouter interface'.
Error Message Incorrect input! Use 'no ip igmp snooping mrouter interface'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘no ip igmp snooping mrouter interface'.
Error Message Incorrect input! Use 'ip igmp snooping groupmembershipinterval
<2-3600>'.
Explanation Incomplete command for this function.
Recommended Action Use complete command ‘ip igmp snooping
groupmembershipinterval <2-3600>'.