© 2011 Fujitsu Technology Solutions
3.4.8 Secure HTTP
This section contains Secure HTTP module messages.
Error Message Incorrect input! Invaild HTTP Secure Port Number. HTTP Secure
Port Set Failed!
Explanation User input invalid port number for HTTP Secure Port.
Recommended Action User can not configure specific protocol port number which is
used by other protocol for HTTP Secure Port.
<ex. telnet: 23, SSH: 22, HTTP: 80>
Error Message Incorrect input! Use 'ip http secure-protocol [TLS1] [SSL3]'.
Explanation User input incomplete command.
Recommended Action Use 'ip http secure-protocol [TLS1] [SSL3]'.
Error Message Protocol <protoclType> could not be set.
Explanation User input invalid value for setting secure-protocol type.
Recommended Action Use [TLS1] or [SSL3] to configure.
Error Message Incorrect input! Use 'ip http secure-port <1-65535>'.
Explanation User input incomplete command.
Recommended Action Use 'ip http secure-port <1-65535>'.
To Next Page
Loading...
