Fujitsu PRIMERGY BX900 - Protocol-Based VLAN

© 2011 Fujitsu Technology Solutions
3.2.4 Protocol-based VLAN
This section contains the Protocol-based VLAN module messages.
Error Message The group does not exist.
Explanation User adds a protocol to an nonexistent group.
Recommended Action Create a Protocol-based VLAN group first.
Error Message The group already exists.
Explanation User attempt to add a protocol group name that had been
created.
Recommended Action Create a protocol group name with an unused name.
Error Message Incorrect input! Use 'switchport protocol group <groupname>'.
Explanation User input incomplete command.
Recommended Action Use 'switchport protocol group <groupname>'.
Error Message VLAN Protocol Group name must be less than 16 characters
Explanation User input a group name over 16 characters.
Recommended Action Use a group name less than 16 characters.
Error Message Incorrect input! Use 'switchport protocol group add protocol
<groupname> {ip|arp|ipx}'.
Explanation User input incomplete command.
Recommended Action Use 'switchport protocol group add protocol <groupname>
{ip|arp|ipx}'.
Error Message Incorrect input! Use 'no switchport protocol group <groupname>'.
Explanation User input incomplete command.
Recommended Action Use 'no switchport protocol group <groupname>'.
Error Message Incorrect input! Use 'no switchport protocol group add protocol
<groupname> {ip|arp|ipx}'.
Explanation User input incomplete command.
Recommended Action Use 'no switchport protocol group add protocol <groupname>
{ip|arp|ipx}'.