© 2011 Fujitsu Technology Solutions
3.1.5 Privilege Level
This section contains the privilege level
Error Message Incorrect input! Use 'privilege <mode> [all] reset <LINE>'.
Explanation User input incomplete command .
Recommended Action Use 'privilege <mode> [all] reset <LINE>
Error Message Error!! Command length should less the 128 characters.
Explanation User input lenth of command is larger then 128 characters.
Recommended Action User enter command length should be less then 128 characters
Error Message Error!! Could not reset this command.
Explanation User input an not configured command.
Recommended Action User should input configured privilege command.
Error Message Error!! Could not find this command.
Explanation User input an not exist command.
Recommended Action User should input exist command.
Error Message Error!! This command had configured already.
Explanation User input a already configured command.
Recommended Action User should input none configured privilege command.
Error Message Incorrect input! Use 'enable [<privilege level>]'.
Explanation User input incompletely command
Recommended Action Use 'enable [<privilege level>]
Error Message No password set.
Explanation User higher access specified privilege level but the level did not
set enable secrect password.
Recommended Action Set enable secrect password for specified privilege level.
Error Message Incorrect input! Use 'disable [<privilege level>]'.
Explanation User input incompletely command
Recommended Action Use 'disable [<privilege level>]
Error Message New privilege level must be less then current privilege level.
To Next Page
Loading...
