Fujitsu PRIMERGY BX900 - SPAN TREE Messages

© 2011 Fujitsu Technology Solutions
2.22 SPAN TREE Messages
This section contains the span tree module messages.
Severity Level 6
Error Message Dot1s registrar ID greater than Last Component ID
Explanation Dot1s module is not registered
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Received a vlan callback while outside the EXECUTEstate
Explanation Dosts module is not ready
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Error on call to sysapiCfgFileWrite routine on configfile
Explanation Failure writing data to configuration file
Recommended Action The span tree config file is corrupt instead of the factory default.
Severity Level 6
Error Message Error on call to osapiFsWrite routine on config file
Explanation Error on call to osapiFsWrite routine on config file
Recommended Action The span tree config file is corrupt instead of the factory default.
Severity Level 6
Error Message dot1sInit: msgQueue creation error.
Explanation Failure creating message queue
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message dot1sInit: timer task creation error.
Explanation Failure creating timer task
Recommended Action The Span Tree module is failed to init.
Severity Level 6
Error Message Unable to initialize dot1s_timer_task
Explanation Failure initializing timer task
Recommended Action The Span Tree module is failed to init.