© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message Modification of vlan %d attempted before bridge initialized
Explanation Dot1q is not initialized before attempting to modify a specific
VLAN.
Recommended Action The VLAN module is failed to init.
Severity Level 6
Error Message Modify of vlan %d failed
Explanation Fail to modify the VLAN.
Recommended Action The VLAN module is failed to init.
Severity Level 6
Error Message Problem updating persistent data for VLAN %d
Explanation Fail to update database with the new VLAN information.
Recommended Action Check the current VLAN configuration set.
Severity Level 6
Error Message Problem updating data for VLAN %d
Explanation Fail to add the entry to the main tree.
Recommended Action Check the current VLAN configuration set.
Severity Level 6
Error Message Cannot find vlan %d to delete
Explanation Can’t find the VLAN for deletion.
Recommended Action Check the current VLAN configuration set.
Severity Level 6
Error Message Problem deleting data for VLAN %d
Explanation Fail to delete the VLAN.
Recommended Action Check the current VLAN configuration set.
Severity Level 6
Error Message Received a interface callback while outside the EXECUTE state
Explanation Processing a message outside the correct phase state.
Recommended Action The VLAN module is failed to init.
To Next Page
Loading...
