Fujitsu PRIMERGY BX900 - IP Subnet-Based VLAN

© 2011 Fujitsu Technology Solutions
3.2.5 IP Subnet-based VLAN
This section contains the IP Subnet-based VLAN module messages.
Error Message Incorrect input! Use 'vlan association {mac <macaddr> <vlanId>
| subnet <ipaddr> <netmask> <vlanId>}'
Explanation User input incomplete command.
Recommended Action Use 'vlan association {mac <macaddr> <vlanId> | subnet
<ipaddr> <netmask> <vlanId>}'
Error Message Incorrect input! Use 'vlan association subnet <ipaddr>
<netmask> <vlanId>'.
Explanation User input incomplete command.
Recommended Action Use 'vlan association subnet <ipaddr> <netmask> <vlanId>'.
Error Message Incorrect input! Use 'no vlan association subnet <ipaddr>
<netmask>'.
Explanation User input incomplete command.
Recommended Action Use 'no vlan association subnet <ipaddr> <netmask>'.
Error Message The IP address and subnet mask combination is not valid.
Explanation The IP address is not match the subnet mask.
Recommended Action Set the valid IP address which can match the subnet mask.
Error Message Subnet mask must have contiguous ones and be no longer than
30 bits.
Explanation The the subnet mask is invalid.
Recommended Action Set the subnet mask with contiguous ones and be no longer than
30 bits.
Error Message Incorrect input! netmask must have contiguous ones.
Explanation The the subnet mask is not contiguous ones.
Recommended Action Set the subnet mask with contiguous ones and be no longer than
30 bits.
Error Message Incorrect input! <ipaddr> must be a valid IP address.
Explanation The the IP address is invalid.
Recommended Action Set the valid IP address with 0 to 255 numeric characters in form
x.x.x.x and avoid the reserved IP address.