© 2011 Fujitsu Technology Solutions
2.25 SNMP Messages
This section contains the SNMP module messages.
Severity Level 6
Error Message Failed to Create SNMP Task.
Explanation (1) Failed to Create SNMP Task.
(2) Failed to Create SNMP Task that save config to flash
Recommended Action The SNMP module is failed to init.
Severity Level 6
Error Message Failed to create SNMP proc monitoring task
Explanation Failed to create SNMP proc monitoring task
Recommended Action The SNMP module is failed to init.
Severity Level 6
Error Message Failed to Create SNMP Cable Test Task.
Explanation Failed to Create SNMP Cable Test Task.
Recommended Action The SNMP module is failed to init.
Severity Level 6
Error Message Failed to Create SNMP Config Task.
Explanation Failed to Create SNMP Config Task.
Recommended Action The SNMP module is failed to init.
Severity Level 6
Error Message Failed to Create RMON Task.
Explanation Failed to Create RMON Task.
Recommended Action The SNMP module is failed to init.
Severity Level 6
Error Message Error on call to sysapiCfgFileWrite routine on config file
Explanation Failed to save SNMP user config file to NVStore
Recommended Action The snmp config file is corrupt instead of the factory default.
Severity Level 6
Error Message SNMP User Config returned failure.
Explanation Waits for SNMP agent to be ready before applying configuration
Recommended Action The SNMP config is failed to init.
To Next Page
Loading...
