Fujitsu PRIMERGY BX900 - VLAN Port Group Messages

© 2011 Fujitsu Technology Solutions
Severity Level 6
Error Message linkSetApplyConfigData: Get Error Result <rc> in
usmDbDot3adCreateSet(), LAG_NAME=<lag name>
Explanation Failed apply config.
Recommended Action The config file is corrupt and use the factory default intead
Severity Level 6
Error Message Adding <interface> to Active port-channel <id> (group: <id>) is
failed
Explanation Failed too add interface to active port-channel.
Recommended Action The config file is corrupt and use the factory default intead
Severity Level 6
Error Message Adding <interface> to Backup port-channel <id> (group: <id>) is
failed
Explanation Failed too add interface to backup port-channe.
Recommended Action The config file is corrupt and use the factory default intead
Severity Level 6
Error Message linkSetIntfChangeCallback: Received an interface event callback
while not in EXECUTE state. (event: <event>, state: <state>)
Explanation linkset is not ready executed.
Recommended Action Send the log to your support agent to find the problem.
Severity Level 6
Error Message Warring : The last member <slot>/<port> of active ports will be
removed!
Explanation The last member of group will be removed from group.
Recommended Action No recommended action, it just a warning message.
Severity Level 6
Error Message Warring : <slot>/<port> cannot be added to the default uplink set
because this set is full!
Explanation
Recommended Action The config file is corrupt and use the factory default intead
Severity Level 6
Error Message LinkSet <name> can't be released by module
Explanation Failed to released linkset by another module.
Recommended Action Send the log to your support agent to find the problem.
2.33 VLAN Port Group Messages
Severity Level 6
Error Message vportGrpsSave: Error on call to sysapiCfgFileWrite for config file
<vportGrps Config File Name>