EasyManua.ls Logo

Fujitsu PRIMERGY BX900 - BOOTP Client Messages

Fujitsu PRIMERGY BX900
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 Fujitsu Technology Solutions
2.13 BOOTP Client Messages
This section contains the BOOTP Client module messages.
Severity Level 6
Error Message do_bootp(): osapiNetIfConfig Failed for Service Interface
Explanation Service interface configured fail.
Recommended Action Check the Bootp Server or interface environment.
Severity Level 6
Error Message do_bootp():usmDbAgentIpIfAddressSet() returned failure.
Explanation The system IP address set fail.
Recommended Action The system IP address is failed to assign.
Severity Level 6
Error Message do_bootp(): osapiSetBroadAddr failed
Explanation Broadcast Address of the interface set fail
Recommended Action The system is connected to the Bootp Server unsucessfuly.
Severity Level 6
Error Message do_bootp():Timeout
Explanation Soctet select timeout.
Recommended Action The system is connected to the Bootp Server unsucessfuly.
Severity Level 6
Error Message do_bootp(): Error in Receiving the packet
Explanation Packet receive fail
Recommended Action The system is connected to the Bootp Server unsucessfuly.
Severity Level 6
Error Message Option not specified in the Vendor field. Possible Reason:This
Tag value not specified on BOOTP server.
Explanation BOOTP option get fail
Recommended Action The BOOTP Server is failed
Severity Level 6
Error Message getParamsFromBootpStruct():L7_bootp_option_get() returned
failure for netmask
Explanation BOOTP option get fail
Recommended Action The BOOTP Server is failed

Table of Contents

Other manuals for Fujitsu PRIMERGY BX900

Related product manuals