© 2011 Fujitsu Technology Solutions
4.5 QoS
4.5.1 DiffServ
This section contains Class-map module messages.
Error Message Invaid Committed Rate. No action taken.
Explanation User input the non-numeric characters for DiffServ policy
Committed Rate.
Recommended Action Set the DiffServ policy Committed Rate with numeric character 1
to 4294967295.
Error Message Error: The Committed Rate is out of range.
Explanation The value of DiffServ policy Committed Rate is out of range.
Recommended Action Set the DiffServ policy Committed Rate with numeric character 1
to 4294967295.
Error Message Error: Invaid Class Name.
Explanation The value of DiffServ Class Name is blank.
Recommended Action Set the DiffServ Class Name with alphanumeric character.
Error Message Error: Name must be alpha-numeric.
Explanation User try to configure DiffServ Class Name with
non-alphanumeric characters.
Recommended Action Use alphanumeric characters for DiffServ Class Name.
Error Message Error: Invaid Class Type.
Explanation User try to configure DiffServ Class Type without specifying the
value.
Recommended Action Use drag-dwon menu to select a value for DiffServ Class Type.
Error Message Error: This Class already exists.
Explanation User try to configure a DiffServ Class, but the Class name is
already used in the system.
Recommended Action Use other Class name to create DiffServ Class.
Error Message ERROR: Class Rule Not Created.
Explanation User try to add a Match Criteria of the DiffServ Class Rule , but
the Match Criteria has been configured.
Recommended Action User can add another Match Criteria for the DiffServ Class Rule.
To Next Page
Loading...
