© 2011 Fujitsu Technology Solutions
4.2.7 GARP
This section contains the GARP module messages.
Error Message Error: Please disable VTP at first.
Explanation The VTP Admin is not disabled before enable GVRP.
Recommended Action The VTP Admin should be disabled before GVRP enabled .
Error Message Error: Join Timer (centisecs) format is invalid.
Explanation The value of Join Timer (centisecs) is not numeric character.
Recommended Action Set Join Timer (centisecs) with numeric character 10 to 100.
Error Message Error: Value (0) is out of range for Join Timer (centisecs). The
valid range is 10 to 100.
Explanation The value of Join Timer (centisecs) is out of range.
Recommended Action Set Join Timer (centisecs) with numeric character 10 to 100.
Error Message Error: Leave Timer (centisecs) format is invalid.
Explanation The value of Leave Timer (centisecs) is not numeric character.
Recommended Action Set Leave Timer (centisecs) with numeric character 20 to 600.
Error Message Error: Value (<value>) is out of range for Leave Timer
(centisecs). The valid range is 20 to 600.
Explanation The value of Leave Timer (centisecs) is out of range.
Recommended Action Set Leave Timer (centisecs) with numeric character 20 to 600.
Error Message Error: Leave All Timer (centisecs) format is invalid.
Explanation The value of Leave All Timer (centisecs) is not numeric
character.
Recommended Action Set Leave All Timer (centisecs) with numeric character 200 to
6000.
Error Message Error: Value (<value>) is out of range for Leave All Timer
(centisecs). The valid range is 200 to 6000.
Explanation The value of Leave All Timer (centisecs) is out of range.
Recommended Action Set Leave All Timer (centisecs) with numeric character 200 to
6000.
To Next Page
Loading...
