© 2011 Fujitsu Technology Solutions
3.1.4 User Manangement
This section contains the User Accounts messages.
Error Message Incorrect input! Use 'username <username> { {passwd {0|7}
<password>} | nopasswd [privilege <0-15>]}'.
Explanation User input incomplete command .
Recommended Action Use 'username <username> { {passwd {0|7} <password>} |
nopasswd [privilege <0-15>]}'.
Error Message Error: Characters in the user name must be alphanumeric and
can contain dashes or underscores.
Explanation User input a user name with non-alphanumeric characters.
Recommended Action Use alphanumeric and dashes or underscores for user name.
Error Message Too many users, delete one first!
Explanation User create a new user name when the table is full.
Recommended Action Maximum 6 users can be created, please delete one first.
Error Message Cannot delete the admin user!
Explanation User attempt to delete the username “admin”, it’s a default
setting can NOT be deleted.
Recommended Action Correct the user name you want to delete.
Error Message Invalid password. User password length must be minimum
password length to 64 characters in length
Explanation User input a invalid password length.
Recommended Action User password length should be less then 64 and larger then
configured minimum length.
Error Message User privilege level must be 0 to 15
Explanation User input a invalid privilege level
Recommended Action User should enter privilege level and the range is 0 to 15
Error Message Error!! Could not set prvilege level for this user.
Explanation User change admin user’s privilege level
Recommended Action User could not chnge the privilege level of admin user account
Error Message Incorrect input!! Use 'enable secret level <1-15> {0|7}
<password>'.
To Next Page
Loading...
