© 2011 Fujitsu Technology Solutions
4.4.9 Secure Shell
This section contains Secure Shell module messages.
Error Message Error: Failed to set Protocol Level. Version 1 or Version 2 must
be enabled.
Explanation User try to disable both version 1 and version 2 of SSH protocol
at the same time, but it is failed.
Recommended Action SSH version 1 or SSH version 2 must be enabled.
Error Message Error: Failed to set SSH Session idle timeout.
Explanation User try to configure SSH Session Timeout with non-numeric
characters or with the value is out of range.
Recommended Action Use numeric characters for Set Connection Timeout and the
range of the value is 1 to 160.
To Next Page
Loading...
