Fujitsu PRIMERGY BX900 - Sntp

© 2011 Fujitsu Technology Solutions
4.1.7 SNTP
This section contains the Global Config messages.
Error Message Error: Value (<value>) is out of range for Port. The valid range is
1 to 65535.
Explanation The value of Port is a non-numeric value or is out of range.
Recommended Action Use numeric value for Port and make sure the value is in the
range of 1 to 65535.
Error Message Error: Value (<value>) is out of range for Unicast Poll Interval.
The range is 6 to 10.
Explanation The value of Unicast Poll Interval is a non-numeric value or is out
of range.
Recommended Action Use numeric value for Unicast Poll Interval and make sure the
value is in the range of 6 to 10.
Error Message Error: Value (<value>) is out of range for Broadcast Poll Interval.
The range is 6 to 10.
Explanation The value of Broadcast Poll Interval is a non-numeric value or is
out of range.
Recommended Action Use numeric value for Broadcast Poll Interval and make sure the
value is in the range of 6 to 10.
Error Message Error: Value (<value>) is out of range for Unicast Poll Timeout.
The range is 1 to 30.
Explanation The value of Unicast Poll Timeout is a non-numeric value or is
out of range.
Recommended Action Use numeric value for the Unicast Poll Timeout and make sure
the value is in the range of 1 to 30.
Error Message Error: Value (<value>) is out of range for Unicast Poll Retry. The
range is 0 to 10.
Explanation The value of Unicast Poll Retry is a non-numeric value or is out
of range.
Recommended Action Use numeric value for the Unicast Poll Retry and make sure the
value is in the range of 0 to 10.