© 2011 Fujitsu Technology Solutions
4.3.8 Link-State
This section contains the Link-State module messages.
Error Message Error: Please disable this group first.
Explanation The Link-State upstream port can not be modified if group mode
is enabled.
Recommended Action Disable Link-State group mode first before modifying upstream
port.
Error Message Error: Failed to set. This function is not allowed on port-channel
members.
Explanation The port-channel member can not set to Link-State group.
Recommended Action Remove the interface from port-channel or attach other interface
to Link-State group.
Error Message Error: Failed to delete Group.
Explanation The Link-State Group is invalid.
Recommended Action Refresh the WEB page, and select the group again.
Error Message Error: Failed to set. Group Id is not existed.
Explanation The Link-State Group is invalid..
Recommended Action Refresh the WEB page, and select the group again.
To Next Page
Loading...
