© 2011 Fujitsu Technology Solutions
3.2.16 MAC Filter
This section contains MAC Filter module messages.
Error Message Error! Attempting to exceed the maximum number of MAC
Filters.
Explanation The table of MAC Filter is full.
Recommended Action User can only input 20 entries of MAC Filter.
Error Message The MAC Filter already exists.
Explanation User input a mac-address that had been created in the table.
Recommended Action Correct the mac-address.
Error Message This Filter does not exist.
Explanation User input a MAC Filter that had NOT been created in the table.
Recommended Action Create the MAC Filter table first.
Error Message Incorrect input! Use 'macfilter [addsrc all] <macaddr> <vlanid>'.
Explanation User input incomplete command.
Recommended Action Use 'macfilter [addsrc all] <macaddr> <vlanid>'.
Error Message Incorrect input! Use 'no macfilter [addsrc all] <macaddr>
<vlanid>'.
Explanation User input incomplete command.
Recommended Action Use 'no macfilter [addsrc all] <macaddr> <vlanid>'.
Error Message Incorrect input! Use 'macfilter addsrc <macaddr> <vlanid>'.
Explanation User input incomplete command.
Recommended Action Use 'macfilter addsrc <macaddr> <vlanid>'.
Error Message Incorrect input! Use 'no macfilter addsrc <macaddr> <vlanid>'.
Explanation User input incomplete command.
Recommended Action Use 'no macfilter addsrc <macaddr> <vlanid>'.
Error Message Incorrect input! Use 'macfilter addsrc all <macaddr> <vlanid>'.
Explanation User input incomplete command.
Recommended Action Use 'macfilter addsrc all <macaddr> <vlanid>'.
To Next Page
Loading...
