Fujitsu PRIMERGY BX900 - Page 226

© 2011 Fujitsu Technology Solutions
Error Message port pair should be configured before enabling this group.
Explanation User attempt to enable a port backup group but either active or
backup port is not configured.
Recommended Action Make sure the port backup group is well configured.
Error Message Port backup group can't be created
Explanation User attempt to create a port backup group but failed.
Recommended Action Make sure the number of port backup group doesn’t reach
maximum.
Error Message Group is not exist.
Explanation User attempt to enter a non-exist group name.
Recommended Action Make sure the group name is exist.
Error Message Incorrect input! Use 'port-backup group [enable] <1-32>'.
Explanation User input incomplete command.
Recommended Action Use 'port-backup group [enable] <1-32>'.
Error Message Incorrect input! Use 'no port-backup group [enable] <1-32>'
Explanation User input incomplete command.
Recommended Action Use 'no port-backup group [enable] <1-32>'
Error Message Incorrect input! Use 'port-backup group <1-32> {active |
backup}'.
Explanation User input incomplete command.
Recommended Action Use 'port-backup group <1-32> {active | backup}'.
Error Message Incorrect input! Use 'no port-backup group [enable] <1-32>'
Explanation User input incomplete command.
Recommended Action Use 'no port-backup group [enable] <1-32>'