EasyManua.ls Logo

Fujitsu PRIMERGY BX900 - IGMP Snooping System Messages

Fujitsu PRIMERGY BX900
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© 2011 Fujitsu Technology Solutions
2.19 IGMP Snooping System Messages
This section contains the IGMP Snooping module messages.
Severity Level 6
Error Message Could not create task snoopTask
Explanation The igmp snooping task can not create.
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message Unable to initialize snoopTask()
Explanation Initializing snoopTask fail
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message snoopTask(): invalid message type:
Explanation Message tyep doesn't exist.
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message snoopTimer(): snoopQueue has not been created
Explanation Creating Message Queue fail.
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message snoopTimer(): Snooping timer tick send failed
Explanation Sending a message into message queue fail
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message snoopPacketHandle(): osapiMessageSend failed
Explanation Sending a message into message queue fail
Recommended Action The IGMP Snooping module is failed to init.
Severity Level 6
Error Message Failed to set global igmp snooping mode to (Enable/Disable)
Explanation Setting global igmp snooping admin mode fail.
Recommended Action The IGMP Snooping module is failed to init.

Table of Contents

Other manuals for Fujitsu PRIMERGY BX900

Related product manuals