Fujitsu PRIMERGY BX900 - Radius

© 2011 Fujitsu Technology Solutions
3.4.3 RADIUS
This section contains RADIUS module messages.
Error Message Incorrect input! Use 'show radius [servers]'
Explanation User input incomplete command .
Recommended Action Use 'show radius statistics <ipAddr|ipv6Addr|name>'
Error Message Incorrect input! Use 'show radius accounting [statistics
<ipAddr|ipv6Addr|name>]'
Explanation User input incomplete command .
Recommended Action Use 'show radius accounting [statistics
<ipAddr|ipv6Addr|name>]'
Error Message No RADIUS servers configured.
Explanation User attempt to show RADIUS server but no server has been
created.
Recommended Action Create a RADIUS server first.
Error Message Incorrect input! Invalid host name or address.
Explanation User input invalid IP address or host name.
Recommended Action Correct the format of IP address or host name.
Error Message Incorrect input! Specify a configured RADIUS accounting server.
Explanation User attempt to set radius-server key to the RADIUS accouting
server, but the RADIUS server IP address doesn’t exist in the
system.
Recommended Action Use exist RADIUS accounting server IP address or use
command ‘radius-server host acct <ipAddr|ipv6Addr|hostname>’
to create radius accounting server first, and then use
command‘ radius-server key acct
<ipAddr|ipv6Addr|hostnamee>’ to set key for radius server.
Error Message Incorrect input! Specify a configured RADIUS server.
Explanation User attempt to set radius-server key to RADIUS server, but the
RADIUS server IP address doesn’t exist in the system.
Recommended Action Use exist RADIUS server IP address or use command
‘radius-server host auth <ipAddr|ipv6Addr|hostname>’ to create
radius server first, and then use command ‘radius-server key
auth <ipAddr|ipv6Addr|hostname>’ to set the key for radius
server.