© 2011 Fujitsu Technology Solutions
4.2.13 Spanning-Tree
This section contains the Spanning-Tree module messages.
Error Message Error: Failed to set Configuration Name. You entered
<config_name>.
Explanation The Spanning-Tree configuration Name is blank.
Recommended Action Create Spanning-Tree configuration Name with up to 32
characters.
Error Message Error: Configuration Revision Level format is invalid.
Explanation The value of Spanning-Tree Configuration Revision Level is not
numeric character.
Recommended Action Set Spanning-Tree Configuration Revision Level with numeric
character 0 to 65535.
Error Message Error: Value (<value>) is out of range for Configuration Revision
Level. The valid range is 0 to 65535.
Explanation The value of Spanning-Tree Configuration Revision Level is out
of range.
Recommended Action Set Spanning-Tree Configuration Revision Level with numeric
character 0 to 65535.
Error Message Error: Bridge Priority format is invalid.
Explanation The value of Spanning-Tree Bridge Priority is not numeric
character.
Recommended Action Set Spanning-Tree Bridge Priority with numeric character 0 to
61440.
Error Message Error: Value (<value>) is out of range for Bridge Priority. The
valid range is 0 to 61440.
Explanation The value of Spanning-Tree Bridge Priority is out of range.
Recommended Action Set Spanning-Tree Configuration Revision Level with numeric
character 0 to 61440.
Error Message Error: Bridge Max Age (secs) format is invalid.
Explanation The value of Spanning-Tree Bridge Max Age (secs) is not
numeric character.
Recommended Action Set Spanning-Tree Configuration Revision Level with numeric
character 6 to 40.
To Next Page
Loading...
