© 2011 Fujitsu Technology Solutions
3.2.2 Port
This section contains the port module messages.
Error Message Incorrect input! Use 'description <string>'.
Explanation User input incomplete command .
Recommended Action Use 'description <string>'.
Error Message Maximum allowed length of Description string is 64 characters.
Explanation User input description string over 64 characters.
Recommended Action Maximum 64 characters can be allowed for interface description.
Error Message In order for physical mode configurations to take effect,
auto-negotiate must be disabled. Use 'no negotiate' command to
disable.
Explanation User attempt to change speed of the port which is working on
auto-negotiate mode.
Recommended Action Disable auto-negotiate before changing the port speed.
Error Message Incorrect input! Use 'channel-group <logical logical slot/port>'.
Explanation User input incomplete command.
Recommended Action Use 'channel-group <logical logical slot/port>'.
Error Message Incorrect input! Use 'delete-channel-group <logical logical
slot/port>'.
Explanation User input incomplete command.
Recommended Action Use 'delete-channel-group <logical logical slot/port>'.
Error Message Incorrect input! Use 'mtu <1518-9216>'.
Explanation User input incomplete command.
Recommended Action Use 'mtu <1518-9216>'.
Error Message Incorrect input! Use 'capabilities {10|100|1000
half-duplex|full-duplex}'.
Explanation User input incomplete command.
Recommended Action Use 'capabilities {10|100|1000 half-duplex|full-duplex}'.
To Next Page
Loading...
