Fujitsu PRIMERGY BX900 - Snmp

© 2011 Fujitsu Technology Solutions
4.1.6 SNMP
This section contains the Community Config messages.
Error Message Error: Failed to set SNMP Community Name. Community name
not entered.
Explanation The value of SNMP Community name is not entered.
Recommended Action Enter SNMP community name to create new community.
Error Message Error: Failed to set SNMP Community Name. Invalid name
entered.
Explanation User configure a non alpha-numeric characters for SNMP
Community Name.
Recommended Action Use alpha-numeric characters to configure SNMP Community
Name.
Error Message Error: Client IP Mask requires a subnet mask in x.x.x.x form.
Explanation The value of Client IP mask is not in x.x.x.x form.
Recommended Action Use x.x.x.x form for Client IP mask.
Error Message Error: Failed to set the SNMP Community Name. This name is
already in use.
Explanation The SNMP name is already configured in the system.
Recommended Action Use other SNMP name for new community.
Error Message Error: Invalid Mask!
Explanation Invalid mask is entered for the Client IP Mask.
Recommended Action Use a valid mask for Client IP Mask.
Error Message Error: Invalid IP Address!
Explanation The input Client IP address is a invalid IP address.
Recommended Action Use a valid IP address for Client IP address.
Error Message Error: Invalid Prefix/Prefix Length!
Explanation The input IPv6 Address is a invalid combination of Prefix/Prefix
Liegth.
Recommended Action Use a valid combination of Prefix/Prefix Liegth.