Fujitsu PRIMERGY BX900 - Access Control Lists

© 2011 Fujitsu Technology Solutions
3.4.6 Access Control Lists
This section contains IP ACL module messages.
Error Message Incorrect input! Use 'no access-list <access-list-number>
[<rule_id>]'
Explanation User input incomplete command .
Recommended Action Use 'no access-list <access-list-number> [<rule_id>]'
Error Message Invalid ACL Name. Name string may include alphabetic,
numeric, dash, dot or underscore characters only. Name must
start with a letter and the size of the name string must be less
than or equal to 31 characters.
Explanation User input invalid format of IP ACL name.
Recommended Action Name string may include alphabetic, numeric, dash, dot or
underscore characters only. Name must start with a letter and
the size of the name string must be less than or equal to 31
characters.
Error Message Incorrect input! Use 'ip access-list rename <oldname>
<newname> '
Explanation User input incomplete command .
Recommended Action Use ' ip access-list rename <oldname> <newname>'
Error Message Access-list does not exist.
Explanation User attempt to rename a non-exist IP access-list.
Recommended Action Make sure the IP access-list is exist.
Error Message Access-list already exists.
Explanation User attempt to rename the IP access-list to a exist IP access-list
name.
Recommended Action To rename a non-exist IP access-list name.
Error Message Incorrect input! The Rule ID <ruleId> is already configured.
Explanation User attempt to create a rule with exist Rule ID.
Recommended Action Create rule with unused Rule ID.
Error Message Invalid start SrcL4Port number. <select SrcL4Port number
between 0 to 65535>
Explanation User attempt to create a rule with invalid SrcL4port number.
Recommended Action Create rule with SrcL4Port number between 0 to 65535.