Fujitsu PRIMERGY BX900 - TACACS Messages

© 2011 Fujitsu Technology Solutions
2.12 TACACS Messages
This section contains the Tacacs module messages.
Severity Level 6
Error Message tacacsSave: Error on call to sysapiCfgFileWrite for config file
<TACACS Config File Name>
Explanation Saves tacacs configuration failed.
Recommended Action The Tacacs config file is corrupt instead of the factory default.
Severity Level 6
Error Message tacacsCtlAdminModeDisable: could not set state to authorized,
intf <Interface Number>
Explanation Could not disable administrative mode setting for tacacs.
Recommended Action The Tacacs module is failed to init.
Severity Level 6
Error Message <File Name>: <Line Number> : tacacsTxPacket: session is null
Explanation Send a data packet to TACACS+ server and the session pointer
is null.
Recommended Action The Tacacs system environment need to be verified.
Severity Level 6
Error Message <File Name>: <Line Number> : tacacsTxPacket: error encrypting
data(key:<Key>)
Explanation Error encrypting data before send a data packet to TACACS+
server.
Recommended Action The Tacacs system environment need to be verified.
Severity Level 6
Error Message <File Name>: <Line Number> : tacacsTxPacket: write to socket
fail
Explanation Write to socket failed when send a data packet to TACACS+
server.
Recommended Action The Tacacs system environment need to be verified.
Severity Level 6
Error Message <File Name>: <Line Number> : tacacsTxAuthenSTART: session
is null
Explanation Send a TACACS+ authentication START packet and the session
pointer is null.
Recommended Action The Tacacs system environment need to be verified.