Fujitsu PRIMERGY BX900 - Uplink Set Messages

© 2011 Fujitsu Technology Solutions
2.32 Uplink Set Messages
Severity Level 6
Error Message linkSetSave: Error on call to sysapiCfgFileWrite for config file
<linkSetConfig File Name>
Explanation Failed saveing linkSetconfiguration.
Recommended Action The config file is corrupt and use the factory default intead
Severity Level 6
Error Message Critical Error!! intIfNum <intIfNum> is neither a active_port
member nor a backup_port member.
Explanation The interface to be removed from a uplink set is neither a active
port nor backup port member.
Recommended Action Send the log to your support agent to find the problem.
Severity Level 6
Error Message Add interface <intIfNum> to port-channel failed (group:
<uplinksetName>)
Explanation The interface to be added to a uplink set is failed.
Recommended Action Send the log to your support agent to find the problem.
Severity Level 6
Error Message Remove interface <intIfnum> from active_port failed (group:
<uplinksetName>)
Explanation The interface to be remove from active port of a uplink set is
failed.
Recommended Action Send the log to your support agent to find the problem.
Severity Level 6
Error Message Remove interface <intIfnum> from backup_port failed (group:
<uplinksetName>)
Explanation The interface to be remove from backup port of a uplink set is
failed.
Recommended Action Send the log to your support agent to find the problem.
Severity Level 6
Error Message Port-backup: Switching to the active port (intIfNum: <intIfNum>)
Explanation Port backup function switch the traffic to active port.
Recommended Action