Fujitsu PRIMERGY BX900 - DHCP Relay Messages

© 2011 Fujitsu Technology Solutions
2.15 DHCP Relay Messages
This section contains the DHCP Relay module messages.
Severity Level 6
Error Message FILE LINE: dhcpRelaySave(): ERROR: Error on call to
dhcpRelaySave routine on config file dhcpRelay.cfg
Explanation DHCP relay configuration file save fail.
Recommended Action The system config is failed to set.
Severity Level 6
Error Message dhcpRelayCnfgrInitPhase1Process: Error allocating memory
Explanation Memory allocate fail.
Recommended Action The DHCP Relay is fail to init.
Severity Level 6
Error Message dhcpRelayCnfgrInitPhase1Process: Error allocating
DHCP_RELAY info structure
Explanation Memory allocate fail.
Recommended Action The DHCP Relay is fail to init
Severity Level 6
Error Message FILE LINE: dhcpRelayCnfgrInitPhase1Process(): Unable to
create DhcpRelayQueue
Explanation Message queue create fail.
Recommended Action The DHCP Relay is fail to init
Severity Level 6
Error Message dhcpRelayStartTasks: Failed to create DHCP_RELAY task
Explanation Task create fail.
Recommended Action The DHCP Relay is fail to init
Severity Level 6
Error Message dhcpRelayStartTasks: Unable to synchronize with
DHCP_RELAY task
Explanation Task initialize fail.
Recommended Action The DHCP Relay is fail to init