Fujitsu PRIMERGY BX900 - Garp

© 2011 Fujitsu Technology Solutions
3.2.7 GARP
This section contains the GARP module messages.
Error Message Incorrect input! Use 'garp timer join all <10-100>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer join all <10-100>'.
Error Message Incorrect input! Use 'garp timer join <10-100>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer join <10-100>'.
Error Message Incorrect input! Use 'garp timer leave <20-600>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer join <10-100>'.
Error Message Incorrect input! Use 'garp timer leave all <20-600>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer leave all <20-600>'.
Error Message Incorrect input! Use 'garp timer leaveall all <200-6000>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer leaveall all <200-6000>'.
Error Message Incorrect input! Use 'garp timer leaveall <200-6000>'.
Explanation User input incomplete command.
Recommended Action Use 'garp timer leaveall <200-6000>'.
Error Message Please disable VTP at first.
Explanation Cannot run VTP & GVRP at the same time.
Recommended Action Disable the VTP function before enabling GVRP.
Error Message Incorrect input! Use 'show garp configuration { <slot/port> | all }'.
Explanation User input incomplete command.
Recommended Action Use 'show garp configuration { <slot/port> | all }'.