Fujitsu PRIMERGY BX900 - Vtp

© 2011 Fujitsu Technology Solutions
4.2.8 VTP
This section contains the VTP module messages.
Error Message Domain name must contain alphaNumeric characters only!
Explanation The Domain name is not alphanumeric characters.
Recommended Action Set Domain name with alphanumeric characters.
Error Message Fail to set V2 Mode.
Explanation The device can not enable VTP V2 mode. The VTP 'Device
Mode' is not set to 'Server' mode.
Recommended Action The VTP 'Device Mode' should be set to 'Server' mode fisrt, and
then enable the VTP V2 Mode.