© 2011 Fujitsu Technology Solutions
4.3 Group Administration (IBP)
4.3.1 Uplink-Set
This section contains the Uplink-Set module messages.
Error Message Error: Failed to set <uplinkSetName>. Uplink Set name must
contain alphanumeric characters only, and can't be empty.
Explanation It is failed to create a Uplink Set while the name is not
alphanumeric characters.
Recommended Action To Create a Uplink Set, the uplink set name have to be
alphanumeric characters and can not be empty.
The Uplink Set name can not contain “default” string.
Error Message Error to set group backup!!
Explanation The Uplink Set name is invalid.
Recommended Action Refresh the WEB page, and select the uplink set name again.
Error Message Error to set link state!!
Explanation The Uplink Set name is invalid.
Recommended Action Refresh the WEB page, and select the uplink set name again.
Error Message Error to set IGMP Snooping!!
Explanation The Uplink Set name is invalid.
Recommended Action Refresh the WEB page, and select the uplink set name again.
Error Message Error to set LACP!!
Explanation The Uplink Set name is invalid.
Recommended Action Refresh the WEB page, and select the uplink set name again.
Error Message Error: Failed to delete Uplink Set <uplinkSetName>.
Explanation The Uplink Set name is invalid.
Recommended Action Refresh the WEB page, and select the uplink set name again.
Error Message Error: Failed to create Uplink Set. Uplink Set already exists.
Explanation The Uplink Set name already exists.
Recommended Action Create the Uplink Set name which is not used.
To Next Page
Loading...
