© 2011 Fujitsu Technology Solutions
4.2.10 MLD Snooping
This section contains the MLD module messages.
Error Message Error: Failed to set Group Membership Interval (secs). You
entered 0.
Explanation The value of MLD Group Membership Interval (secs) is not
numeric character.
Recommended Action Set MLD Group Membership Interval (secs) with numeric
character 2 to 3600.
Error Message Error: Failed to set Group Membership Interval (secs). You
entered (<value>).
Explanation The value of MLD Group Membership Interval (secs) is out of
range.
Recommended Action Set MLD Group Membership Interval (secs) with numeric
character 2 to 3600.
Error Message Error: Maximum Response Time format is invalid.
Explanation The value of MLD Snooping Maximum Response Time is not
numeric character.
Recommended Action Set MLD Snooping Maximum Response Time with numeric
character 1 to (Group Membership Interval -1).
Error Message Error: Value (<value>) is out of range for Maximum Response
Time. The valid range is 1 to (Group Membership Interval -1).
Explanation The value of IGMP Snooping Maximum Response Time is out of
range.
Recommended Action Set IGMP Snooping Maximum Response Time with numeric
character 1 to (Group Membership Interval -1).
Error Message Error: Multicast Router Present ExpirationTime (secs) format is
invalid.
Explanation The value of MLD Snooping Multicast Router Present
ExpirationTime is not numeric character.
Recommended Action Set MLD Snooping Multicast Router Present ExpirationTime with
numeric character 0 to 3600.
Error Message Error: Value (<value>) is out of range for Multicast Router
Present ExpirationTime (secs). The valid range is 0 to 3600.
Explanation The value of MLD Snooping Multicast Router Present
ExpirationTime is out of range.
Recommended Action Set MLD Snooping Multicast Router Present ExpirationTime with
numeric character 0 to 3600.
To Next Page
Loading...
