Fujitsu PRIMERGY BX900 - STORM CONTROL Messages

© 2011 Fujitsu Technology Solutions
2.23 STORM CONTROL Messages
This section contains the storm control module messages.
Severity Level 6
Error Message Failure setting interface <intIfNum> broadcast storm mode to
<mode>
Explanation Failure setting the broadcast mode for an interface.
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message Failure setting interface <intIfNum> flow control mode to
<mode>
Explanation Failure setting the flow control for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyApplyIntfConfigData: error returned from
policyIntfBcastCtrlLimitApply() for intIfNum=<intIfNum>
Explanation Failure setting the broadcast rate limiting for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyApplyIntfConfigData: error returned from
policyIntfFlowCtrlModeApply() setting intIfNum=<intIfNum> to
mode=<mode>
Explanation Failure setting the flow control for an interface
Recommended Action The interface number need to be checked available by the
system.
Severity Level 6
Error Message policyApplyIntfConfigData: error returned from
policyIntfMcastCtrlLimitApply() for intIfNum=<intIfNum>
Explanation Failure setting the multicast rate limiting for an interface
Recommended Action The interface number need to be checked available by the
system.