© 2011 Fujitsu Technology Solutions
4.1.10 LLDP
This section contains the Global Config messages.
Error Message Error: Transmit Interval format is invalid.
Explanation User input a non-numeric value for Transmit Interval.
Recommended Action Use numeric value for Transmit Interval.
Error Message Error: Value (<value>) is out of range for Transmit Interval. The
valid range is 1 to 32768.
Explanation The value of Transmit Interval is out of range 1 to 32768.
Recommended Action The value of field should be in the range of 1 to 32768.
Error Message Error: Hold Multiplier format is invalid.
Explanation User input a non-numeric value for Hold Multiplier.
Recommended Action Use numeric value for Hold Multiplier.
Error Message Error: Value (<value>) is out of range for Hold Multiplier. The
valid range is 2 to 10.
Explanation The value of Hold Multiplier is out of range 2 to 10.
Recommended Action The value of field should be in the range of 2 to 10.
Error Message Error: Re-Initialization Delay format is invalid.
Explanation User input a non-numeric value for the Re-Initialization Delay.
Recommended Action Use numeric value for Re-Initialization Delay.
Error Message Error: Value (<value>) is out of range for Re-Initialization Delay.
The valid range is 2 to 10.
Explanation The value of Re-Initialization Delay is out of range 1 to 10.
Recommended Action The value of field should be in the range of 1 to 10.
Error Message Error: Notification Interval format is invalid.
Explanation User input a non-numeric value for Notification Interval.
Recommended Action Use numeric value for Notification Interval.
Error Message Error: Value (<value>) is out of range for Notification Interval.
The valid range is 2 to 10.
Explanation The value of Notification Interval is out of range 5 to 3600.
Recommended Action The value of field should be in range of 5 to 3600.
To Next Page
Loading...
