© 2011 Fujitsu Technology Solutions
4.4.2 Port Security
This section contains Port Security module messages.
Error Message Error: Port Security Dynamic Limit format is invalid.
Explanation User uses non-numeric characters for Dynamic Limit.
Recommended Action Use numeric character for Dynamic Limit.
Error Message Error: Value (<value>) is out of range for Dynamic Limit. The
valid range is 0 to 600.
Explanation The value of dynamic limit is out of range.
Recommended Action The range of Dynamic Limit is 0 to 600.
Error Message Error: Port Security Static Limit format is invalid.
Explanation User use non-numeric characters for Static Limit.
Recommended Action Use numeric character for Static Limit.
Error Message Error: Value (<value>) is out of range for Port Security Static
Limit. The valid range is 0 to 20.
Explanation The value of Maximum Number of Statically Locked MAC
Addresses Allowed is out of range.
Recommended Action The range of Maximum Number of Statically Locked MAC
Addresses Allowed is 0 to 20.
Error Message Error: MAC Address requires a MAC address in form
01:23:45:67:89:AB.
Explanation The character of Static MAC Address is not hexadecimal form.
Recommended Action To set Static MAC address with hexadecimal character 1 to F.
(xx:xx:xx:xx:xx:xx)
Error Message Error: Failed to add Port Security Static MAC Address
Explanation The Static MAC Address is already configured.
Recommended Action Create other Static MAC Address which is not used.
Error Message Error: VLAN ID format is invalid.
Explanation User uses non-numeric characters for VLAN ID.
Recommended Action Use numeric character for VLAN ID.
To Next Page
Loading...
